ALL CATEGORIES

OnBoard IS-1000 HV Cryogenic Compressor

New never used

Cryogenic Vacuum Pump

Units are new condition.  

Part No.: 8185426G001

Cryogenic Vacuum Pump

Part No.: 8185428G001

Like new condition

Gate Vacuum Valve

Mist Filter

Turbo Pump Controller Cable 

Edwards is a Seiko Seiki Distributor

TIC Instrument Controller - 3 Head

TIC can accodomate 3 active gauges and automatically recognizes and controls active gauges
including APG100 Pirani, convection, thermocouple, strain, inverted magnetron, wide range and active ion gauges.

Two Stage Rotary Vacuum Pump

Pumping speed and ultimate pressure are based on 60 Hz operation.

Two Stage Mechanical Vacuum Pump

Pumping speed and ultimate pressure are based on 60 Hz operation.

Vacuum Pumping System

External Oil Filtering System

Designed for use with the following pumps:
E1M18/E2M18, E1M40/E2M40, E1M80/E2M80,
E1M175/E2M175, and E1M275/E2M275.

--Large capacity BOC Edwards GV600F Drystar dry mechanical pump.
--Aerzen GLB.15.11 HV-07 roots blower.
--Please see attached documentation.

From Edwardsvacuum.com:

The design of the Edwards GV dry pumps is based on the well-proven claw technology for dry pumps. Two pairs of claw shaped rotors on two shafts rotate in opposite directions to trap and compress the pro­cess gas which flows along the axis of the shafts between the claw pairs.

During each complete rotation of the claws, first the inlet port of each claw pair is exposed (to admit gas to the pump), then both the inlet and outlet are isolated (to trap and compress the gas), and then the outlet is exposed (to expel the compressed gas). The claw mechanism offers the following features:

•Dry operation, non contact mechanism
•Self valving - the pump can deliver to atmospheric pressure
•Short gas path - better particulate handling
•Staged compression - efficient power use
•High process temperature - excellent water vapor handling


Reliability
Low vacuum bearings (at the exhaust stage of the pump) are protected from the process stream by a unique gas-purged shaft-seal. Compressed air is fed to the shaft seals which prevents the ingress of process contaminants, including gases, vapors and particulates.

Low cost of ownership
GV pumps can offer real cost of ownership savings. The GV pumps are robust and reliable, delivering a reduction in process downtime which would lead to lost production. In addition, the minimized cost of routine maintenance (such as oil and filter replacement, spares inventory holding and oil disposal) all adds to the savings using GV dry pumps. With service intervals of 18 months for re-greased bearings and 3 years for bearing changes, the GV pumps offer a highly reliable and cost effective alternative to piston pumps.

Manual Operation Isolation In-Line Vacuum Valve

Part number C41421000

Dry Vacuum Pump

 Part number: A409-02-973

Dry Vacuum Pump

 Part number: A409-14-973

Vacuum Pumping System

Harsh Duty Dry Pump

Like new condition.  Check out the detailed photos.

Never used in process.

System was partially installed, and removed due to project cancellation. 

Abatement Module with Wet Electrostatic Percipitator Module

Angle Vacuum Valve

Edwards Part Number: C41415000

Vacuum Pumping System

Control and Enclosure for QDP80/QMB500 Vacuum Pumping System.

Vacuum Pumping System

Two Stage Mechanical Vacuum Pump

Pumping speed and ultimate pressure are based on 60 Hz operation.

Edwards RV3

Turbomolecular Vacuum Pump Control Unit SCU-800. 

Dry Scroll Vacuum Pump

Edwards Vacuum im Interface Module (Used/Working)

Fluid Dispenser

• Equipment for automated stencil printing 
• Designed for automated input and output
• Printing format min 80x50mm, max 510x510
• Not suitable for manual loading and unloading

Plasma Trap Electrode

DC Power Supply

Manufactured for Varian

NB: These power supplies have Varian branding on them and there are three color variants available/shown. If color matters please inquire about availability.  

DC Power Supply

Manufactured for Varian

Direct Current Power Supply

DC Power Supply

Electronic Measurements Inc. has been acquired by TDK-Lambdas America Inc.

DC Power Supply

DC Power Supply

Manufactured for Astex